Set ESPHOME calibrate_linear values using HA
I am trying to control ESPHOME calibrate_linear values using HA. I am recieving PH data vrom my ads1115 module and doing the initial callibration with calibrate_linear filter. My code looks like this:...
View ArticleClik here to view.
BH1750 with NodeMCUv3 : Found no i2c devices
Hi Everyone, I’m trying to build my first sensor. I configured NodeMCUv3 with ESPHome integration within HA and added sensors step by step as guide suggested. Temperature/Humidity sensor (dht) is...
View Article4 relays board dont work after esp8266 reboot
Hello coders I have 4 channel relays controlled by esp8266 and esphome. Everything works great until the esp8266 is restarted. LED 1(in1) lights up on the relay board and esp8266 stops working. When I...
View ArticleClik here to view.
CT Clamp log output to LCD
Hello all, I’m currently experimenting with a Wemos D1 mini and a CT clamp (30A 1V) and it looks it is starting to work with good readings. Though I would like to have the values from the log output...
View ArticleClimate presets in esphome
I’m trying to figure out how esp-home interacts with home-assistant climate presets. I’ve found that the only preset available (in esphome) is “away”. The idea is to modify that to allow the use of...
View ArticleMultiple outputs as one addressable light?
Does anybody know if it’s possible to have multiple outputs with LEDs connected to them, configured as a single addressable light? I’ve built an Arduino powered christmas tree years ago, which...
View ArticlePWM fan - set fanspeed as percentage?
I have an esp8266 unit with a PWM fan attached to it. It is adjusted by PWM. configged as: sensor: - platform: dht pin: D1 temperature: name: "AVR temperatur" id: avr_temperature humidity: name: "AVR...
View ArticleBluetooth ble sensor for esphome diy
Good day! the idea is simple, to make a universal ble sensor that can be used in the future as; -street meteorological station water leakage sensor -control of the state of various devices and...
View ArticleFatal exception 29(StoreProhibitedCause)
Hi, I have following error when flashing my ESP8266 nodemcuv2. I used ESPHome Flasher through a usb connnection. My yaml code is around 750 lines. Is there a limit? ANyone has an idea what could be...
View ArticleIncorporating Sensors on a WLED flashed board?
So I decided to try flashing one of my Wemos D1 Minis with WLED and to my satisfaction, it worked flawlessly and showed up in HA without fail…however… I was wondering how I could use more of the pins...
View ArticleClik here to view.
ESP32 functions unavailable when on extended WIFI
Hi Folks, HA is running on a PI3 B with RJ 45 connection to the primary router. The ESP32 in my home office is connected to the same router’s wifi and things work well in HA. I have another ESP32 in...
View ArticleIs there a way to selectively limit what's recorded to History by an ESPHome...
I created a scale that fits the base of my daughter’s crib and sends the measurement through a Wemos D1 Mini to HA. I’m looking to accomplish a few things: Record values only when the scale is...
View ArticleDoppler HB100 Radar
Has anyone been able to connect the HB100 Doppler radar motion sensor? 1 post - 1 participant Read full topic
View ArticleReporting Switch Status with allowing it to be changed
Hello, Im using a Somoff TH10 to monitor the humidity in my bathroom, and then turn on/off a fan based on the humidity reported. This is working fine, and, if I wish I can turn on/off the fan manually...
View ArticleMUE4094RT Philips Xiaomi Motion Sensor
I’m having trouble getting this to work. I have two and ESPhome is not detecting them. Any idea how to get them to work? I’m pretty sure I have the correct mac addresses because I use bluetooth...
View ArticleEsphomeflasher Permission denied: '/dev/ttyUSB0' when flashing binary
Very new to this. ESPHome add-on would not recognise my CP2102 USB module and only offer OTA to flash my Sonoff switch. I installed the esphomeflasher module (OS linux Mint). I run esphomeflasher from...
View ArticleCan't get D1 Mini to connect to Wifi
I have D1 Mini ver 3.0.0 Hassio 0.118.3 ESPhome 1.15.3 This is my simple code: esphome: name: kitchenleds platform: ESP8266 board: d1_mini wifi: ssid: "JAB-CAN" password: "xxxxxxxxx" # Enable logging...
View Article433Mhz Etekcity Remote Outlet using remote_transmitter
I am hoping someone can help me figure out what I’m doing wrong trying to control a https://www.amazon.com/Etekcity-Household-Appliances-Unlimited-Connections/dp/B00DQELHBS with a Wemos D1 Mini Pro...
View ArticleHow do I print (lambda) out a sensor state
I am setting up a small OLED screen, and I want to show current time, and some weather conditions like current weather, wind force and temperature. I get all to show correctly, except for the string...
View ArticleClik here to view.
Lost configuration for power plug
Hi, So awhile ago I tested to flash Deltaco SH-P01 with success but never came around to use them. Now when christmas is close I saw a chance to use them for the extra lights I since I did the setup...
View Article