Connect ESP32 to HA after flashing with ESPHome-Flasher
I was able to get the ESPHome configuration up and running from ESPHome on Home Assistant, but it kept throwing an error that says: serial.serialutil.serialexception: read failed: device reports...
View ArticleSet_brightness() always sets light to off
I am still pretty new to ESPHome, so I could easily be overlooking something, but I am having a lot of trouble with some simple code to set my led color/brightness. I’m using a simple RGB led bulb and...
View ArticleSonoff basic r1 - code change can't connect to wifi
Hello, When I flash simple sonoff basic r1 esphome code: esphome: name: grzalka_zasobnik platform: ESP8266 board: esp01_1m wifi: ssid: "voboIOT" password: "xxxxxxxxxxxxxxxx" # Enable fallback hotspot...
View ArticleESPHOME + NodeMcu goes offline
HI guys. Ive got a weird problem. I have 3 reed switches connected to a NodeMcu. For ages i had my own arduino code running on it, using MQTT and some mqtt binary_sensors in HA. I decided to switch...
View ArticleProper ePaper-Display Treatment in ESPHome
Hello fellow ESPHome-Users, currently i’m trying to implement two TTGO T5 ePaper-ESP32-Modules (2.13 inch, V2.3 through the esphome-dev-branch 0.1.16-dev with model: 2.13in-ttgo-b73), which is working...
View ArticleMonitoring LEDs on Garage Door Motor
My garage door has a pair of LEDs, one for when it is open, one for when it is closed. I will be using an ESP8266 to control the door, and also wondered if it is possible to also monitor the status of...
View ArticleUse ESPHome to dimand/or turn on/off nextion display
Is there any option to from and ESPHome perspective turn on/off and/or dim the screen? Now my display is “always” on. There are options in nextion itsself to dim the screen but this is don with a...
View ArticleESPHome devices lose their connection and won't reconnect
My light bulbs flashed with ESPHome looses WiFi connection and is then unable to reconnect. When the bulbs are lit in about 5-10 minuets they loose wifi connection. Then they are unable to reconnect...
View ArticleNot sure how to add an If Statement to my code
switch: - platform: gpio pin: GPIO13 id: grn_led inverted: yes restore_mode: RESTORE_DEFAULT_OFF - platform: template name: "Repeater Green LED" optimistic: yes id: grntemp1 turn_on_action: -...
View ArticleEsp 8266 with ssd1306 no wifi
Hi, not an expert at these things so bare with me. a generic 8266 board from Ebay and a ssd1306 screen. Using the code on the esp website I have managed to get it working. However, when I use 3.3v...
View ArticleSDS011 or UART bug?
hi, I just got an SDS011 sensor and connected that to a clean ESP8266 (ESP12e) according to the instructions and config entries here in the official ESPHome page. Several builds and tries and can’t...
View ArticleClik here to view.
Can not flash ESp with dallas sensor (without i works)
github.com/esphome/issues ESP Home Dallas Temperature does not flashed opened 01:37PM - 11 Sep 20 UTC ImmanuelT8 Operating environment/Installation (Hass.io/Docker/pip/etc.): ESP (ESP32/ESP8266,...
View ArticleClik here to view.
Radio Remote with ESP for call bell system?
Hi I’m trying to implement a call bell system with ESP. (for the ones not aware of what is call bell, it’s a system used in large properties and that basically consists of little wireless buttons that...
View ArticleAfter " arduino_version: latest" - can't OTA
I had issues with a particular LED downlight model which reboot itself after 10 minutes or so when turned on. No rebooting when these downlights (x4) where off. These lights worked on Tasmota, so I...
View ArticleESPHOME binary state error
Hi everyone, with a nextion display I am making a control to turn on the lights and close the terrace curtains. I am using, for shelly 1 lights and 2.5 for shelly curtains. I connected the nextion...
View ArticleDefault Light Temperature
Hey guys - I am using a light flashed w/ ESPHome and I wanted to know if there was a way to set a default color temperature when i power it on as on the rare instances it loses power, it powers up to...
View ArticleUse WS2812B ring to display sensor value
Howdy, building on this thread, I want to use a 24 LED ring to display the value of power imported/exported to the grid. I have this value as a sensor (via emoncms), either +ve or -ve depending on the...
View ArticleLambda to reset an AM2302 power
I’ve installed 6 of the AM2302 temperature and humidity sensors around my house, but now discover they are unreliable and lockup every day or so on my ESP8266 units. Lots of info online in arduino...
View ArticleTwo sensors on the SPI bus MAX6675
Does anyone know how to configure two max6675 (SPI) temperature sensors in esphome? Please help. 1 post - 1 participant Read full topic
View ArticleEsphome device not appearing on hassio
I have 7 esphome devices to control lights around my house. All working great except one, that after a reboot doesn’t connect to hassio anymore. It works fine in esphome, I can connect to the webpage...
View Article