Setting up new ESP32
@rayjay86 wrote: Sorry total noob at this I thought I’d try my hand at incorporating some esp32 devices in my house I’ve got a few xiaomi BLE temp sensors that are well picked up by the Yeelight...
View ArticleHelp with this Lambda
@Pas940 wrote: This is gettig the better of me, I want it to be fast, like microcontroler fast. I had it working but still had issues with is only running when the sensor updated. I’m trying to...
View ArticleESPHome 1.14.4 breaks Dallas Sensor [Errno 111] Connection refused
@waphass wrote: ESPHome 1.14.4 not working with Dallas sensor. Wifi is connecting and wifi sensor working but if you have dallas: in your config your node will not work anymore and you got [Errno 111]...
View ArticleConnecting a bathroom scale to homeassistant
@gald33 wrote: Hi everyone, I want to hack a scale and use esp8266 and hx711 to automatically pass measurements to home assistant, where I would display it as a sensor. I know esphome has a HX711...
View Article'On ESPHome Counting and display pulses on gpio binary sensor and duration of...
@albertstuder wrote: On ESPHome with an ESP8266 i have a remote waterpump connected to a binary_sensor where it shows me the status of the pump ‘ON or OFF’ I try to figured out how to count the...
View ArticleEsp32 disconnects when using Google WiFi
@salvoc81 wrote: I have been using Esp32 (through Esphome) to read the data from my xiaomi sensors with no problem for month. The setup is as follows: Raspberry B+ with HA directly connected to the...
View ArticleClik here to view.
Resistor Sensor, is this upstream or downstream?
@ideal2545 wrote: Hey All, Trying to get some temp reading from an NTC Sensor, im working on getting the readings properly but I’m having a bit of a hard time undrestanding ‘upstream’ vs ‘downstream’,...
View ArticleNeed help for mqtt_subscribe
@IngoNRW wrote: Hello, i want to display a HA Value to a LCD attached on ESP The LCD is ready to use and i know that i must use the mqtt_subscribe but can i become please a example how i publish the...
View ArticleUsing Ultrasonic sensor HC-SR04 in 3-wire mode
@parautenbach wrote: Is it ok to use this sensor with esphome in 3-wire mode? I’m thinking it might be ok, having read this paragraph in an online article: In 3-Wire mode the single I/O pin is used as...
View ArticleClik here to view.
10k NTC Thermistor - Not Reading Resistance Properly?
@ideal2545 wrote: Hi All, So I have a 10KOhm thermistor, that I have in series with a 10KOhm 1% resistor. I have the datasheet which effectively states the the B_Constant is 3997 @ 1%. I have verified...
View ArticleWhat is the maximum reading of the pulse width sesnor?
@dave_sausages wrote: I’ve got an ESP32 running the pulse width sensor on a light detector module attached to the blinking light on my electricity meter. I’m using it to detect the time between pulses...
View ArticleESPHome Code Assistance
@Gazza wrote: Hi, I need some code assistance please. I am looking to turn a PCF8574 on and off (linked to a light). It runs off a D1Mini and i have it displaying what i need correctly. So far code i...
View ArticleError when compile .yaml file whit ESPHome
@papacharlie wrote: 220/5000 Hi all, this is my first post. I have been using Home Assistant for a few months, but suddenly something started to go wrong. I am going crazy to try to understand what...
View ArticleEspHome Native API question
@mspinolo wrote: Disclaimer:: I am not a network expert hence my statements could be wrong Hi, logging my network activity with Wireshark I see Esphome flashed ESP8266/ESP32 send a decent amount of...
View ArticleExample request for HA TV remote
@gald33 wrote: I’m trying to build a device based on esp8266 that makes HA a remote for the TV. The goals are: To turn TV on/off and change channels and volume from HA. To intercept (read, not stop)...
View ArticleControl power to sensor
@ChrisPriest wrote: Hi Everyone! First time here and been searching for an answer to this for a while, hoping someone may have already done it? I have an ESP32 setup with a resistance water level...
View ArticleESPHome on value range
@Skydesign wrote: Hi Everyone! Please, help me solve the problem in ESPhome? I have a problem with the switch configuration depending on the temperature. I want the pump to work in the temperature...
View ArticleClik here to view.
Gosund SP111 plug Timer Automation not working
@Tom74 wrote: Hello, I have flashed the Gosund SP111 plug with the ESPHome Firmware. I have setup the ESPHome Component in HA and I can turn on and off the relay on the lovelace card. For testing...
View ArticleYeelight 480 info
@kylegordon wrote: Don’t suppose anyone has torn down a Yeelight 480, or put ESPHome on it? I’m after a couple, but it’s a bit of an investment with no guarantee that ESPHome will run on it. I don’t...
View ArticleClik here to view.
ESPHome: coin collector as what (binary_sensor, sensor, pulse_counter, ...)?
@prankousky wrote: Hi everybody, I have a CH-926 coin collector which I am trying to integrate to my Home Assistant via ESPHome. Does anybody here have experience with this kind of device and can help...
View Article