Please help on lambda function
@laca75tn wrote: I have the following code on my esphome yaml file: globals: - id: servo_level type: float restore_value: no initial_value: '0' api: services: - service: control_servo variables:...
View ArticleESPHome Multiple Network config. What am I missing?
@finity wrote: I’m trying to transition my wifi AP’s to different SSID’s. So I’m trying to make sure the ESPHome nodes can connect to the new one before I remove the old so I figured I’d set up the...
View ArticleWifi Landscape Lighting (ESPHome?)
@Linwood wrote: I did several LED controllers with esphome, and it’s simple and fast and easy and has been dead reliable. I want to do some kind of landscape lighting, but I do not think I want tape...
View ArticleESPHome UART template string
@CMDK wrote: Hi all, I’m trying make an IR receiver to control an audio-matrix, and I want to be able to control multiple zones from each receiver in the house. My ‘fixed’ UART commands work, but I...
View ArticleDeep sleep and multiple buttons
@drogfild wrote: Hi, I have two specific questions about ESPHome deep sleep. I’m trying to make a remote that has three buttons and ESP32. And naturally it should wake up from sleep on any of those...
View ArticleESPhome devices offline
@SagiRo wrote: Hello everyone, since 2 days ago, when I updated my hassos and hassio to 0.104.3 and hassos 3.8, I can’t seem to get any of the nodes to connect. I read in the release notes that there...
View ArticleLivolo Switch RF 433- Custom Component
@Lijah wrote: Hi, I create a custom switch component in ESPHome to drive my Livolo switches. Livolo switch with the RF 433 option use a no standard protocol. I didn’t succeed to adapt existing core RF...
View ArticleWifi_info text sensor does not show ip address
@laca75tn wrote: Since I upgraded my nodes to 1.14.3 my text_sensor: platform: wifi_info (ip address and ssid) show unavailable. WiFi signal works and node is connected to Internet. Any ideas? The...
View ArticleRotary Encoder to control cover position
@D4VEW557 wrote: Hi all, I am trying to use a rotary encoder to control a cover position. I am able to achieve this using several automation’s but I’m sure there must be a shorter way to do using...
View ArticleDevice recommendations?
@jjross wrote: Is there a wiki or website I can go to so I can figure out what the best devices are? I’m looking for some colour bulbs but I’m hoping to get some that are easy to flash and use....
View ArticleAPI Connection state in lambda
@JamesT42 wrote: Hi! I’m trying to implement a display with infos regarding the api state. It should display something like online/offline. For this i’m using a lambda. But I’m unable to get it to...
View ArticleClik here to view.
Help with a Custom Sensor
@truglodite wrote: I’m having trouble getting esphome to compile with a custom sensor I’m trying to implement (for an ms5611 baro). The default library esphome uses for that results in erroneous baro...
View ArticleFailed to connect to ESP32: Invalid head of packet (0x1B)
@bphillips921 wrote: I’m trying to flash ESPHome onto this Nodemcu-32S board. I go through all the normal steps to flash the device but end up with this error: A fatal error occurred: Failed to...
View ArticleClik here to view.
HC-SR501 no good for ESPhome... change the docs?
@truglodite wrote: I am proposing a change to the esphome pir documentations… ESPHome Passive Infrared Sensor Instructions for setting up PIR (passive infrared) motion detection sensors in ESPHome The...
View ArticleHow to read a variable from a custom_component (wiegand)
@Stepan wrote: Hi all! I got stucked with my first custom integration. I want to integrate a rfid reader. I have use the code from gdoerr The code has been successfully read with my rfid reader and...
View ArticleESPhome peristaltic pump
@Omerdagan wrote: Hello, As a part of my on going project of building the ultimate HA&ESPhome Aquarium controller,I need to control a peristaltic pump controlling fertilizer dosing to the system....
View ArticleESPhome and USB/serial connection
@mauog wrote: I read that ESPHome can support serial trough USB connection to upload firmware to ESP32 device, Unfortunately I can see only the OTA function on the ESPhome GUI in HA. I already tried...
View ArticleClik here to view.
Lost Connection every 20sec
@fylo wrote: Hello, i have an simple setup: ESP 8266 with several DS18B20 sensors. I use ESPHome and the API connection to Home Assistant. Everything works well: But every 20 sec the data of all...
View ArticleCan I change IP address over the air?
@mpaneth wrote: I currently have an ESP32 using DHCP to get its IP address and now want to give it a different fixed address in the same subnet. Is there a way to recompile with the new fixed address...
View ArticleESPHome - Unexpected error: ESP Chip Auto-Detection failed
@klogg wrote: I’ve flashed a few devices in the past with no problems but today I am getting this error when using esphomeflasher. Using 'COM8' as serial port....
View Article